PRO LIGNO versiune online ISSN 2069-7430  
     
 
   
 

 

 

 

 

 

 

 

 

   

Editorial

 
  [Download pdf]     pp. 1-2
 
Research Articles:
  Mark IRLE, Therese FRIEDRICH, Marie LABISTE, Tristan RICHARD
Formaldehyde in Wood: Where Does it Come From?
  [Download pdf]     pp. 3-7

  Joris VAN ACKER
Moisture Dynamics Defining Service Life Performance of Wood Products
  [Download pdf] pp. 8-26
   
  Petr KLIMEK, Rupert WIMMER
Alternative Raw Materials for Bio-Based Composites
 
  [Download pdf]     pp. 27-41
   
  Marius Catalin BARBU, Timothy Mark YOUNG, Salim Selim HIZIROGLU
Trends of the Wood Products Higher Education in North America
  [Download pdf]     pp. 42-54
         
  Linda SCHREINER, Jonathan BEAUCHAMP, Andrea BUETTNER
Characterisation of Odorants in Wood and Related Products: Strategies, Methodologies and Achievements
  [Download pdf]     pp. 55-62
         
  Matyas BADER, Robert NEMETH
Mechanical Characterisation of Accordionisated Wood, Effect of Relaxation Conditions
  [Download pdf]     pp. 63-70
         
  Anton KRALER, Wilfried BEIKIRCHER, Armin ROFNER
Selected Characteristics of Norway Spruce With Indended Rings (Hazel Growth) for Violins
  [Download pdf]     pp. 71-77
         
  Dimitrios KOUTSIANITIS, Ioannis BARBOUTIS
Application of High Frequency Densitometry to Determine Wood Density and Ring Width of Beech Trees
  [Download pdf]     pp. 78-83
         
  Seif Eddine HAMDI, Rostand MOUTOU PITTI, Malick DIAKHATE, Manja KITEK KUZMAN
Evidence of Climatic Effect on Viscoelastic Orthotropic Materials: Numerical Investigation of Thermo-Hydro Loadings on European Wood Species
  [Download pdf]     pp. 84-88
         
  Andromachi MITANI, Vasileios FILIPPOU
The Effect of Heat Treatment on the Withdrawal Capacity of Screws in Fir Wood (Abies borisii-regis)
  [Download pdf]     pp. 89-93
         
  Marina Ulian COELHO, Claudio DEL MENEZZI, Mario Rabelo de SOUZA
Abrasion Resistance of Pinus Wood Subjected to Thermomechanical Treatmens
  [Download pdf]     pp. 94-100
         
  Linda Makovicka OSVALDOVA
Influence of Fire Retardant on Selected Thermal Insulating Materials on Natural Base – Wooden Fibreboard
  [Download pdf]     pp. 101-106
         
  Vasiliki KAMPERIDOU, Ioannis BARBOUTIS
Mechanical Strength and Surface Roughness of Thermally Modified Poplar Wood
  [Download pdf]      
        pp. 107- 114
  Ilze IRBE, Juris GRININS, Bruno ANDERSONS, Ingeborga ANDERSONE
Durability of Thermo-Hydro Treated (THT) Birch Veneers and Plywood
  [Download pdf]      
        pp. 115- 122
  Adam SIKORA, Stepan HYSEK, Milan GAFF, Petr HORACEK, Veronika VONDROVA
Selected Physical Properties of Thermally Modified Spruce Wood
  [Download pdf]      
        pp. 123- 132
  Daniela SOVA
Effective Specific Heat of Wood Briquettes
  [Download pdf]     pp. 133-141
         
  Lars BLOMQVIST, Jimmy JOHANSSON, Steffen LANDSCHEIDT, Henrietta NILSON
Resource Utilisation in a Production Cell for Laminated Veneer Products
  [Download pdf]     pp. 142-147
         
  Georgi VUKOV, Zhivko GOCHEV, Valentin SLAVOV, Pavlin VICHEV, Valentin ATANASOV
Mechanic-Mathematical Model for Investigations of the Forced Spatial Vibrations of Wood Shaper and its Spindle, Caused by Unbalance of the Cutting Tool
  [Download pdf]     pp. 148-153
         
  Georgi VUKOV, Zhivko GOCHEV, Valentin SLAVOV, Pavlin VICHEV, Valentin ATANASOV
Numerical Investigations of the Forced Spatial Vibrations of a Wood Shaper and its Spindle, Caused by Unbalance of the Cutting Tool
  [Download pdf]      
        pp. 154-161
  Johan SKOG, Mikael JACOBSSON, Anders LYCKEN
Traceability and Adaptive Production in the Digital Sawmill
  [Download pdf]     pp. 162-167
         
  Adriana FOTIN, Ivan CISMARU
Mechanization of Wooden Framed Lamellar Panels Designed for Packaging Crates, Way of Increasing Productivity and Quality
  [Download pdf]     pp. 168-173
         
  Mihai ISPAS, Sergiu RACASAN
Study Regarding the Influence of the Tool Geometry and Feed Rate on the Drilling Quality of MDF Panels
  [Download pdf]     pp. 174-180
         
  Jose COUCEIRO, Margot SEHLSTEDT-PERSSON, Lars HANSSON, Olle HAGMAN, Dick SANDBERG
CT Scanning of Capillary Phenomena in Bio-Based Materials
  [Download pdf]     pp. 181-187
         
  Zsigmond VAS, Levente DENES
Compression Strength of Veneer Reinforced Sandwich Panels
  [Download pdf]     pp. 188-193
         
  Claudio DEL MENEZZI, Ana Paula NAKAMURA, Francis QUEIROZ, Matheus COUTO
Physical and Mechanical Properties of Teakwood LVL Bonded With Expanded Polystyrene
  [Download pdf]     pp. 194-198
         
  Roman REH
Decorative Veneer Properties of Butternut (Juglans cinerea L.)
  [Download pdf]     pp. 199-204
         
  Mariana Domnica STANCIU, Horatiu TEODORESCU-DRAGHICESCU, Andrei URSARESCU, Pavel Cristian LABONT, Cornel Sandi BIT
Numerical and Experimental Approach of Behaviour of the Wood Based Composite Subjected to Cyclic Bending
  [Download pdf]     pp. 205-211
         
  Octavia ZELENIUC, Luminita BRENCI, Cosmin SPIRCHEZ
Evaluation of Oriented Strand Board Behavior on Fire
  [Download pdf]     pp. 212-218
         
  Carolina GONCALVES, Joao PEREIRA, Nadia PAIVA, Joao FERRA, Jorge MARTINS, Fernao MAGALHAES, Ana BARROS-TIMMONS, Luisa CARVALHO
Study of the Synthesis Parameters of an Urea-Formaldehyde Resin and Their Impact on Particleboard Properties
  [Download pdf]     pp. 219-226
         
  Sebastian KRENN, Hermann HUBER, Marius Catalin BARBU, Alexander PETUTSCHNIGG, Thomas SCHNABEL
Insulation Boards Made of Annual and Perennial Plants Bonded With Tannins and Other Adhesives
  [Download pdf]     pp. 227-235
         
  Derya USTAOMER, Ayfer DONMEZ CAVDAR
Some Properties of Decorative MDF Panels Manufactured from Coloured Wood Fibers
  [Download pdf]      
        pp. 236-241
  Derya USTAOMER, Elif TOPALOGLU, Nurgul AY
Some Properties of Fiberboards Manufactured With Ash (Fraxinus excelsior L.) Sawdust
  [Download pdf]      
        pp. 242-246
  Viktor SAVOV, Julia MIHAILOVA
Influence of the Content of Lignosulfonate on Physical Properties of Medium Density Fiberboard
  [Download pdf]      
        pp. 247-251
  Viktor SAVOV, Julia MIHAILOVA
Influence of the Content of Lignosulfonate on Mechanical Properties of Medium Density Fiberboard
  [Download pdf]     pp. 252-256
         
  Husnu YEL, Hulya KALAYCIOGLU, Ugur ARAS
Utilization of Silica Fume in Manufacturing of Cement Bonded Particleboards
  [Download pdf]     pp. 257-263
         
  Kadir KARAKUS, Ibrahim Halil BASBOGA, Ilkay ATAR, Fatih MENGELOGLU
Utilization of Hazelnut Shells as Filler in LDPE/PP Based Polymer Composites
  [Download pdf]     pp. 264-268
         
  Ayfer DONMEZ CAVDAR, Hulya KALAYCIOGLU, Fatih MENGELOGLU
Coupling Agent Effect on the Properties of Thermoplastic Composites Filled Sand-Dust from Medium Density Fiberboard
  [Download pdf]     pp. 269-275
         
  Ibrahim Halil BASBOGA, Ilkay ATAR, Kadir KARAKUS, Fatih MENGELOGLU
Determination of Selected Properties of PP Based Composites Filled Eggplant (Solanum melongena) Stalks
  [Download pdf]     pp. 276-282
         
  Cosmin SPIRCHEZ, Aurel LUNGULEASA
Research Into the Properties of an Innovative Wood-Plastic Composite
  [Download pdf]     pp. 283-289
         
  Gry ALFREDSEN, Christian BRISCHKE, Linda MEYER-VELTRUP, Miha HUMAR, Per Otto FLÆTE
The Effect of Different Test Methods on Durability Classification of Modified Wood
  [Download pdf]     pp. 290-297
         
  Julia BUCHNER, Mark IRLE, Christophe BELLONCLE, Franck MICHAUD, Nicola MACCHIONI
How Do Biotic and Abiotic Factors Combine to Affect the Weathering of Wood Surfaces?
  [Download pdf]     pp. 298-301
         
  Dimitar ANGELSKI, Pavlin VITCHEV, Vladimir MIHAILOV
Influences of Some Factors on Adhesion Strength Between PVC Foil and Particle Board
  [Download pdf]     pp. 302-307
         
  Miklos BAK, Robert NEMETH, Ferenc MOLNAR
Effect of Nanoparticles on the Wood-Water Relations
  [Download pdf]     pp. 308-315
         
  Pavel PORI, Marko PETRIC
Enhancement Possibilities for Surface Finished Wood Properties with Hydrothermal Deposition of Titania Particles
  [Download pdf]     pp. 316-322
         
  Fanni FODOR, Chiel LANKVELD, Robert NEMETH
The Influence of Acetylation on the Colour and Photostability of Common Hornbeam Wood (Carpinus Betulus L.)
  [Download pdf]     pp. 323-330
         
  Anca Maria VARODI, Maria Cristina TIMAR, Liu Xin YOU, Camelia COJOCARIU
Effect of Natural Ageing in Indoors Conditions on the Colour of Wood Surfaces Finished with Natural Traditional Materials
  [Download pdf]     pp. 331-340
         
  Peter RADEMACHER, Robert NEMETH, Miklos BAK, Fanni FODOR, Tamas HOFMANN, Jan BAAR, Petr PARIL, Radim ROUSEK, Zuzana PASCHOVÁ, Pavel SABLIK, Gerald KOCH, Uwe SCHMITT, Dietrich MEIER, Yongshun FENG, Eckhard MELCHER, Bodo SAAKE, Milan SERNEK
European Co-Operation in Wood Research from Native Wood to Engineered Materials. Part 1: Chemical Modification with Native Impregnation Agents
  [Download pdf]     pp. 341-350
         
  Peter RADEMACHER, Matyas BADER, Robert NEMETH, Radim ROUSEK, Petr PARIL, Jan BAAR, Stanislav HORNICEK, Ales DEJMAL, Jakub DOMENY, Jozef KUDELA, Andreja KUTNAR, Benedikt NEYSES, Dick SANDBERG
European Co-Operation in Wood Research from Native Wood to Engineered Materials. Part 2: Densification Modification in Product Development
  [Download pdf]     pp. 351-360
         
  Peter RADEMACHER, Matyas BADER, Robert NEMETH, Petr KLIMEK, Vaclav SPRDLIK, Radim ROUSEK, Petr CERMAK, Alexander PFRIEM, Moritz SANNE, Peter MEINLSCHMIDT, Rupert WIMMER, Johann TRISCHLER, Dick SANDBERG
European Co-Operation in Wood Research from Native Wood to Engineered Materials. Part 3: Engineered Hybrid Wood-Based Products
  [Download pdf]     pp. 361-372
         
  Tom FRANKE, Axel MUND, Claudia LENZ, Nadine HEROLD, Alexander PFRIEM
Microscopic and Macroscopic Swelling and Dimensional Stability of Beech Wood Impregnated with Phenol-Formaldehyde
  [Download pdf]     pp. 373-378
         
  Daniela TESAROVA, Petr CECH, Josef HLAVATY
Influence of Coating Formulation on Physical-Mechanical Properties
  [Download pdf]     pp. 379-386
         
  Jozef VALENT, Eva PAPP, Janos PALLA, Csilla CSIHA
Water Permeability of Two Different Wood Lasures
  [Download pdf]     pp. 387-90
         
  Ali BAYATKASHKOLII, Batoul KAMESHKI, Soltan RAVAN, Mohammad SHAMSIAN
Comparing Durability of Wooden Products Against Microcerotermes Diversus in Regions of Jiroft and Sistan of Iran
  [Download pdf]     pp. 391-397
         
  Ozlem BOZDOGAN BALCIK, Turgay OZDEMIR
Effect of Bleaching Chemicals on Some Varnishing Properties of Spruce Wood
  [Download pdf]     pp. 398-403
         
  Susan M. MILLIS
In Search of a Suitable Coating for Pyrography
  [Download pdf]     pp. 404-413
         
  Emanuela BELDEAN, Levente MAJOS
Restoration of Gilded Frames - Challenge and Satisfaction. A Case Study
  [Download pdf]     pp. 414-420
         
  Nicola MACCHIONI, Simona LAZZERI, Lorena SOZZI
Wood Identification of Antique Tools Used for Manual Paper Production
  [Download pdf]     pp. 421-428
         
  Ion Valeriu OLARU, Maria Cristina TIMAR, Anca Maria VARODI, Daniela Adela VACARIU, Ileana CHIRTEA
Restoration of an Italian “Cassone” from 17th Century
  [Download pdf]     pp. 429-436
         
  Maria Cristina TIMAR, Emanuela BELDEAN, Anca Maria VARODI, Ioan MUSCU
Old Wood Recovered from Constructions – from Scientific Challenge to Design Opportunities
  [Download pdf]     pp. 437-446
         
  Constantin Stefan IONESCU, Aurel LUNGULEASA
Problems and Solutions of Classical and Innovative Interventions on Cultural Objects with Wood Supports
  [Download pdf]     pp. 447-454
         
  Regina RAYCHEVA, Dessislava ANGELOVA
Woven Furniture Design: In Search of Form and Texture
  [Download pdf]     pp. 455-465
         
  Vasiliki KAMPERIDOU
Critical Points in the Construction of Aged People Furniture
  [Download pdf]     pp. 466-470
         
  Biborka BARTHA, Alin OLARESCU
Guide for Value-Adding Contemporary Architecture and Furniture Design in Vernacular Spirit
  [Download pdf]     pp. 471-481
         
  Reka Maria ANTAL, Peter Gyorgy HORVATH, Levente DENES
Body Pressure Distribution Analysis of Layered Foam Systems
  [Download pdf]     pp. 482-488
         
  Ioan MUSCU, Marina CIONCA, Biborka BARTHA
A Vision of the Human Body as a Seating Concept
  [Download pdf]     pp. 489-499
         
  Sergiu GEORGESCU, Bogdan BEDELEAN
Effect of Heat Treatment on Compresive and Tensile Strength of End to Edge Butt Joint
  [Download pdf]     pp. 500-507
         
  Adrian PETRU, Aurel LUNGULEASA
Colour Infuence of the Laser Raster Speed on Wood Pyrography
  [Download pdf]     pp. 508-515
         
  Tonis TEPPAND
Long Span Portal Frame Made from Glulam and CLT Mounted Together Using Only Carpentry Joints
  [Download pdf]     pp. 516-519
         
  Virgil GRECU
Research Upon Creating a System for Conversion the Water Kinetic Energy of Hill and Mountain Rivers in Green Energy, Using Recycling Materials
  [Download pdf]     pp. 520-526
         
  Olimpia-Minerva TURCAS (DIACONU), Adriana FOTIN, Ivan CISMARU
Determining the Behavior of the Basketball, on Vertical Direction, on Surfaces of Floorings Conceived for Gymnasiums
  [Download pdf]     pp. 527-532
         
  Magnus FREDRIKSSON, Olof BROMAN, Dick SANDBERG
The Use of CT-Scanning Technology in Wood Value-Chain Research and in Wood Industry - A State of The Art
  [Download pdf]     pp. 533-539
         
  Magnus FREDRIKSSON, Olof BROMAN
Factors Affecting Volume Yield in a Forestry-Wood Value Chain – a Simulation Study Based on CT Scanning
  [Download pdf]     pp. 540-548
         
  Alketa GREPCKA, Leka GEDESHI, Denisa LAMI
Production Flow Analysis Based on GT Concepts in Wood Prodution Factory - Case Study
  [Download pdf]     pp. 549-556
         
  Panagiotis BARMPOUTIS
Contribution and Combination of Different Wood Sections in Species Recognition Using Image Texture Analysis Methods
  [Download pdf]     pp. 557-564
         
  Timothy YOUNG, Alexander PETUTSCHNIGG, Marius BARBU
Industry 4.0 – Pragmatic Algorithms, Information Quality and Relational Databases
  [Download pdf]     pp. 565-569
         
  Vasilis FILIPPOU, Ioannis PHILIPPOU, Ioannis ELEYTHERIADHS, Konstantinos TSIOTAS
Fuel Properties of Oak, Poplar and Pine Logging Residues
  [Download pdf]     pp. 570-578
         
  Aurel LUNGULEASA, Cosmin SPIRCHEZ, Adriana FOTIN
Research on Briquettes Obtained from Shredded Tobacco Cigarettes, as a Ligno-Cellulose Fuel
  [Download pdf]     pp. 579-585
         
  Johann TRISCHLER, Dick SANDBERG
Competitive Strategies to Wood Production in Europe – A Conceptional Study
  [Download pdf]     pp. 586-593
         
  Fredrik LINDBLAD, Matti FLINKMAN, Tobias SCHAUERTE
Assessing Corporate Economic Distress: A Study of the Wood Construction Industry
  [Download pdf]     pp. 594-601
         
  Fredrik LINDBLAD, Tobias SCHAUERTE
Identifying Drivers Facilitating Product Development Within the Industry for Wooden Multi-Family Houses
  [Download pdf]     pp. 602-609
         
  Adina CANDREA, Cristina ANTONOAIE
CRM (Customer Relationship Management) in SMEs in Wood Industry
  [Download pdf]     pp. 610-616
         
  Kadir DOGAN, M. Hakan AKYILDIZ
Situation of Wood-Based Panel Industry in Turkey
  [Download pdf]     pp. 617-629
         
  Ioannis BARBOUTIS
Fraud Cases in the Field of Wood Science
  [Download pdf]     pp. 630-636
         
  Radu Dan PALTAN, Loredana Anne-Marie RADULESCU, Cristina Maria BIRIS
Economical Engineering Aspects Applied in the Managerial Decision for the Implementation of an Optimization Method to Streamline the Processes in the Wood Industry
  [Download pdf]     pp. 637-644
         

Flash News

pp. 645
         

Recent publications

pp. 646
         

Event  

 
  The Series “ICWSE” Reached Its 11th Edition (Brasov, 2 – 4 November 2017)  
  [Download pdf]     pp. 647-649
         
  Etnovember 2017
  [Download pdf]     pp. 650-655
         
  Erasmus Visitors from Partner Countries at the Faculty of Wood Engineering
  [Download pdf]     pp. 656
         
Glossary of Speciality-Specific Terms (available only in Romanian language) pp. 657-659
 

 

 
 
Pagina creata de Costel AGACHE. Intretinere pagina Luminita Brenci. Ultima actualizare, 30 decembrie 2017