STUDY CONCERNING THE INFLUENCE OF DRYING TEMPERATURE UPON THE COLOUR OF BEECH VENEERS
Constantin MITUCA
Dr.Eng. - S.C. LOSAN S.R.L. Brasov
Address: Str. Ioan Clopotel nr. 14, 507075 Ghimbav,
Brasov
Tel: +40 268 415181. Fax: +40 268 474665. E-mail:
constantin.mituca@losan.ro
Marius LUPASCU
Eng. - S.C. LOSAN S.R.L. Brasov
Address: Str. Ioan Clopotel nr. 14, 507075 Ghimbav,
Brasov
Tel: +40 268 415181. Fax: +40 268 474665. E-mail:
mariuslupascu06@yahoo.com
Iulian BRATU
Drd.Eng. - Ocolul Silvic Rasinari R.A.
Address: Str. O. Goga nr. 1687 Rasinari, jud.
Sibiu
Tel: +40 209557779. Fax: +40 209557779. E-mail:
ybratu@com
Alexandru MITISOR
Prof.Dr.Eng. - Universitatea "Transilvania"
din Brasov - Facultatea de Industria Lemnului
Address: B-dul Eroilor nr. 29, 500036 Brasov,
Romania
Tel.: +40 268 412912/192. Fax: +40 268 415315.
Abstract: The paper
presents a comparative analysis upon the colour
of veneers resulted from freshly cut beech wood
(with sap) and from beech wood treated by hot
water immersion at 90°C, respectively. The
colour parameters were measured both for the white
wood and the red heart wood and the colour differences
that occurred after drying at different temperatures
were determined as well.
Key words: beech veneers, drying,
colour.
REFERENCES
BOICIUC, M. (1964). Tratamente hidrotermice si higrotermice
in industria lemnului (Hydrothermic and Hygrothermic
Heat Treatments in Wood Industry). Editura Tehnica,
Bucuresti.
FILIPOVICI, J. (1965). Studiul lemnului. Volumul
II (Study of Wood. Volume II). Editura Didactica
si Pedagogica, Bucuresti.
MITISOR, A.; ISTRATE, V. (1982). Tehnologia furnirelor,
placajelor si placilor din fibre de lemn (The Technology
of Veneers, Plywood and Fibreboards). Editura Tehnica,
Bucuresti.
SALCA, E.; CISMARU, I.; FOTIN, A. (2007). Effect
of Sunlight upon Colour Stability of Alder and Cherry
Veneers. PRO LIGNO Journal 3(4):65-72.
*** ISO 7724-2:1984. Paints and Vernishes. Colorimetry.
Part 2: Colour Measurement.
*** SR EN 13183-1:2003. Continutul de umiditate
al unei piese de cherestea. Partea 1: Determinare
prin metoda de uscare (Moisture Content of Wood.
Part 1: Ovendrying Method).
|