LABORATORY
FOR TESTING THE MANUFACTURING ACCURACY IN WOOD
INDUSTRY
Entering of Romania into the European Union spells
the guaranty of the quality of the products sold
in the countries belonging to the European Union.
This will be certified by testing bulletins, which
are the proof that the finite wooden products
and the wooden based products made by the manufacturers
from Romania meet the quality indicators requested
by the norms and regulations in force.
For this purpose, in the frame of
the Wood Industry Faculty in Brasov the most modern
laboratory of testing the manufacturing accuracy
of the components specific to furniture and finite
wooden products, unique in Romania was set up
on the 23-rd of April 2004.
The measuring methods used in this
laboratory guarantee the accuracy of the results,
offering data about the quality level of the production
process to the manufacturers.
The laboratory is endowed with the
following equipment:
1. CaDesQ Measuring Table - designed for the measurement
of the following dimension, shape and position
deviations:
a) Deviations of the linear dimensions: length,
width, thickness;
b) Deviation of the hole positions;
c) Straightness deviation;
d) Rectangularity deviation;
e) Depth hole deviation;
f) Deviation of the hole diameter.
2. OptoDesQ Measuring Table - designed
for the measurement of the following shape deviations
and deviations of the jointing elements:
a) Flatness deviation;
b) Rectangularity deviation;
c) Straightness deviation;
d) Groove and rebate measurement.
3. LaminatDesQ Measuring Table -
designed to measure jointing elements:
a) Measuring the tongue dimension;
b) Measuring the groove dimension.
4. Roughness meter for wood surfaces.
Contact persons:
:
|